> For the complete documentation index, see [llms.txt](https://help.visuary.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://help.visuary.com/guide-visuary-en/vos-premiers-projets-sur-visuary/dessiner-un-plan.md).

# Draw a plan

Draw a plan with or without a reference plan (JPG, PNG)

*If you don’t have a device that supports scanning, you can draw your floor plan directly in Visuary from the Existing floor plan tab.*

Below are the steps to create your floor plan, with or without a reference plan.<br>

{% hint style="success" icon="lightbulb" %}
If you have a reference plan, [**click here**](#pour-utiliser-un-plan-de-reference-suivez-les-etapes-detaillees-ci-dessous) to go straight to the steps.
{% endhint %}

***

## If you don’t have a reference plan

{% embed url="<https://files.gitbook.com/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FZFcDkdPcFkKsLAju8DW3%2Fuploads%2FwpjBIugyvUh3yXv3WnJ9%2Fdessine_plan_sans_ref.mp4?alt=media&token=7cdb9502-f954-4210-8d1a-d12342748d3f>" %}

To draw a floor plan:

1. Click the **Structure**
2. Select a **boundary type** from the different types of walls, floor boundaries or exterior boundaries.
3. Click the floor plan area to start drawing. Change direction at each corner to create your walls. Repeat until all your walls are connected.&#x20;
4. Once drawn, click a wall to select it, then use the arrows to adjust it.
5. Click "**Finish**"&#x20;

{% hint style="warning" %}
Make sure all the walls have the same wall anchor. To learn more about wall anchors, [**click here.**](https://help.visuary.com/guide-visuary-en/le-plan/bati.md#modifier-lancrage)
{% endhint %}

***

### Change the type of walls

{% embed url="<https://files.gitbook.com/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FZFcDkdPcFkKsLAju8DW3%2Fuploads%2F2TQ5PnhjHWSibyuFGd2o%2Ftype_de_murs.mp4?alt=media&token=1d2a27ce-2c80-4d53-b1c0-2c4424e1a129>" %}
Modify the wall type on the plan
{% endembed %}

Modify the wall type after drawing the plan or the Scan:&#x20;

1. **Click a wall** to select it
2. In **"wall types"**, click the**down arrow icon** to open the drop-down menu, then select the desired wall type
3. In "**Templates**" click on "**Replace** **with**" to find the desired material
4. Close the menu by clicking the arrow at the top left

***

### Add windows and doors

{% embed url="<https://files.gitbook.com/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FZFcDkdPcFkKsLAju8DW3%2Fuploads%2FR4rK0AxWO4XSf2C16yO0%2Fajout_menuiserie.mp4?alt=media&token=27b4771a-0939-4287-8e4e-f5445676dbf2>" %}

To add windows and doors:

1. Click **Objects**
2. Find the object you want in the **search bar**
3. **Place the object** on your floor plan by clicking where you want it
4. **Resize it by dragging the small circles** on each side of the object (if you’ve selected a resizable object)
5. In the **Objects** menu that opens on the left, click "Replace with" to choose a different model

***

## If you have a reference plan

*If you already have a floor plan of the dwelling, you can add it as a reference plan in the tool. It will serve as a visual guide, allowing you to easily recreate the plan by drawing over it, like a layer.*\
\
Below are the steps to follow, from adding the plan to scaling it, with each step explained.

{% embed url="<https://www.youtube.com/watch?t=17s&v=8cOz8NEoPIM>" %}

{% hint style="warning" %}
**The reference plan is visible only on the device it was added from**.

If you open the same project on another device, the reference plan won’t be visible.\
To use it on a new device, you’ll need to add it again.
{% endhint %}

***

### To use a reference plan, follow the steps below:

### Import a reference plan

{% embed url="<https://files.gitbook.com/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FZFcDkdPcFkKsLAju8DW3%2Fuploads%2F8oP3u7HUvlcjJ7esRjd3%2FImporter%20un%20plan%20de%20r%C3%A9f%C3%A9rence.mp4?alt=media&token=3ae9ac84-e614-43be-8099-c0e1b3717d01>" %}
Import a reference plan
{% endembed %}

To import a reference plan:&#x20;

1. Click the **three dots** in the top-right corner of the screen
2. Click "**Reference plan**". This opens a new "Reference plan" tab to the left of the current floor plan.
3. Click the "**Browse**" button and **select your file** (.jpg, .png, or .pdf format)

{% hint style="warning" %}
The reference plan must be in **.png, .jpg, or .pdf format.** \
If your file is in the wrong format, we recommend using an [online converter](https://acrobat.adobe.com/link/acrobat/pdf-to-image?x_api_client_id=adobe_com\&x_api_client_location=pdf_to_image) or taking a screenshot of your plan.&#x20;
{% endhint %}

### Scale a reference plan

{% embed url="<https://files.gitbook.com/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FZFcDkdPcFkKsLAju8DW3%2Fuploads%2FQcRXNNM0MFqCKqDCK8tp%2FEchelle%20r%C3%A9f%C3%A9rence%20.mp4?alt=media&token=4b5f402d-2d78-484c-953a-2b3ca76c950c>" %}
Scale a reference plan
{% endembed %}

To scale the reference plan:

1. **Select the orange Dimension by its endpoints and place it over the longest Dimension on the plan.**\
   For the most accurate scale, choose the longest Dimension. Feel free to **zoom in very close** on the orange scale so you can grab its end, move it, and adjust its length.
2. **Enter the measurement** shown by the red Dimension line in the “Scale” text field at the top left of your screen.
3. Once the scale is set, click the “**Use as Layer”** button at the bottom of the screen.**.**

You can now start [drawing your plan](https://help.visuary.com/guide-visuary-en/le-plan/bati.md) over the reference plan.

### Move the reference plan

{% embed url="<https://files.gitbook.com/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FZFcDkdPcFkKsLAju8DW3%2Fuploads%2FhN609VQP08xWGjfNcaVC%2FD%C3%A9placer%20r%C3%A9f%C3%A9rence.mp4?alt=media&token=12325856-f79b-4225-84bd-3c125eed7f6c>" %}
Move the reference plan
{% endembed %}

To move the reference plan in the Workspace:&#x20;

1. **Press and hold the Shift key** on your keyboard.
2. While holding the key, click the reference plan to select it, then **drag it with your mouse**.

### Adjust the plan opacity&#x20;

{% embed url="<https://files.gitbook.com/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FZFcDkdPcFkKsLAju8DW3%2Fuploads%2FqTTmuDSRucj2448PPfjl%2FOpacit%C3%A9%20plan%20de%20r%C3%A9f%C3%A9rence.mp4?alt=media&token=dac55129-89b7-46ca-a1d3-e93b2e674cce>" %}
Adjust the opacity of the reference plan
{% endembed %}

To adjust the plan opacity:&#x20;

1. Use the “**Opacity**” slider at the bottom of the screen to make the plan drawn in Visuary transparent.

{% hint style="success" icon="lightbulb" %}
We recommend **setting the plan opacity to 60%** so you can see both the reference plan and the plan drawn in Visuary.&#x20;
{% endhint %}

### Hide the reference plan

{% embed url="<https://files.gitbook.com/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FZFcDkdPcFkKsLAju8DW3%2Fuploads%2FsX7X52AfYu0FjWPO0NcZ%2FDisparaitre%20calque%20r%C3%A9f%C3%A9rence.mp4?alt=media&token=ec9a3124-570c-4831-9853-1728db901663>" %}
Delete a reference plan
{% endembed %}

To hide the reference plan: &#x20;

1. Click the eye icon at the bottom right to display the list of Layers.
2. Turn off the “**Reference plan**".&#x20;

***

### Import a reference plan to compare, check, and correct an existing plan.

Whether your plan has already been drawn or scanned, you can add a reference plan to check its accuracy and correct it if needed.&#x20;

To do this, follow [the same steps described above](#importer-un-plan-de-reference). Once the reference plan has been [scaled](#mettre-un-plan-de-reference-a-lechelle) you can [move it](#deplacer-le-plan-de-reference) to position it over the existing plan.

{% embed url="<https://www.youtube.com/watch?v=3pVVczAyC1o>" %}

## Go further

* Specify the type of walls, add insulation, etc.
* Add openings, equipment, and Furnishings
* Add finishes to walls, floors, ceilings, and baseboards

<table data-view="cards"><thead><tr><th></th><th data-hidden data-card-target data-type="content-ref"></th></tr></thead><tbody><tr><td>Structure</td><td><a href="https://help.visuary.com/guide-visuary-en/le-plan/bati.md">Structure</a></td></tr><tr><td>Objects</td><td><a href="https://help.visuary.com/guide-visuary-en/le-plan/les-objets.md">Objects</a></td></tr><tr><td>Finishes</td><td><a href="https://help.visuary.com/guide-visuary-en/la-visualisation/les-revetements.md">Coverings</a></td></tr></tbody></table>


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://help.visuary.com/guide-visuary-en/vos-premiers-projets-sur-visuary/dessiner-un-plan.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
