> For the complete documentation index, see [llms.txt](https://help.visuary.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://help.visuary.com/guide-visuary-en/le-plan/bati.md).

# Structure

The Construction menu groups the main construction elements in the plan, such as walls, the Insulation layer, and some structural elements.

<figure><img src="https://4038224095-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FZFcDkdPcFkKsLAju8DW3%2Fuploads%2F9NsHg32qHT4JVxcSl4ea%2FHeader_Murs_V3.gif?alt=media&amp;token=aac001a7-823e-4d47-ae57-eabc13076691" alt="Créer des murs sur Visuary "><figcaption></figcaption></figure>

**Draw a floor plan, a room, or a partition wall:**

1. Click the **Building**
2. Select a **boundary type** from the different wall types, floor boundary, or exterior boundaries
3. Click the floor plan area to start drawing. Change direction at each corner to create your walls. Repeat until all your walls are connected.&#x20;
4. Once drawn, click a wall to select it, then use the arrows to adjust it.
5. Click “Finish”

{% hint style="warning" %}
**Change the wall height:** \
\
Wall height depends on ceiling height. To change it, use the “Ceilings” button.\
Follow the steps in this link: [**How do I add ceilings to the floor plan?**](https://help.visuary.com/guide-visuary-en/le-plan/les-plafonds.md)
{% endhint %}

***

## Load-bearing elements

The “Load-bearing elements” section includes the elements that support the building’s structure (load-bearing walls, beams, columns). Identify them before making any changes or openings.

### Walls&#x20;

#### Create a wall with precise dimensions using the numeric keypad

{% embed url="<https://files.gitbook.com/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FZFcDkdPcFkKsLAju8DW3%2Fuploads%2FGdsAK5WcEB0mf8TZba5k%2Fmur_clavier_num.mp4?alt=media&token=db15d196-eed0-4ba0-93cd-a36febd8c8d4>" %}

To create a wall with a preset dimension:

1. Click the **“Building”** button and select the wall type you want.
2. Click the grid background in the interface to **set the wall’s starting point**.
3. **Enter the desired length using your numeric keypad**. The wall automatically adjusts to the specified dimension.
4. Click the grid background in the interface again to confirm and set the wall’s position.

#### Change a wall’s dimensions using the numeric keypad

{% embed url="<https://files.gitbook.com/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FZFcDkdPcFkKsLAju8DW3%2Fuploads%2FJFp10C6p0folXn4OR3UU%2Fcorrection_cotes.mp4?alt=media&token=4562396f-1519-4555-b794-f6b2f4d06e4b>" %}

To change a wall’s dimensions using the numeric keypad:

1. Click the wall to select it
2. Click one of the dimensions (inside or outside) to select it. A box will appear in the top-left corner of the screen.
3. In the box, click the left or right arrow, depending on which side of the wall you want to adjust the dimension from.
4. Enter the wall’s new dimension, then click the confirmation icon or press “Enter” on your keyboard.

#### Change a wall’s dimensions manually&#x20;

{% embed url="<https://files.gitbook.com/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FZFcDkdPcFkKsLAju8DW3%2Fuploads%2FDr6LlbR0HZ1lWNSpXVKp%2Fcote_manuelle.mp4?alt=media&token=c44231ba-c583-44a5-820f-171cd1c6d469>" %}

To change a wall’s dimensions using the mouse:&#x20;

1. Click the wall to select it
2. At the end you want to adjust, click and hold the circle at the end of the wall, then move your mouse to lengthen or shorten it as needed.

#### Change a wall’s model

{% embed url="<https://files.gitbook.com/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FZFcDkdPcFkKsLAju8DW3%2Fuploads%2FnvJaZG1S9yzuiLbGBvwq%2Fmodifier_modele_mur.mp4?alt=media&token=08aea6bc-936b-4034-a33e-64e0666440c2>" %}

To change the wall model:&#x20;

1. **Click a wall** to select it
2. In the **“Models”**, click **“Replace with”**
   1. Choose the model that matches the material the wall is made of
   2. Click **“Finish”**

{% hint style="success" icon="lightbulb" %}
**Save time by selecting multiple walls at once:**

1. **Click a wall** to select it
2. Press the **“Shift”** key on your keyboard
3. **While holding the key down**, **select the other walls** you want to modify by clicking them.
   {% endhint %}

#### Change the thickness of a load-bearing wall

{% embed url="<https://files.gitbook.com/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FZFcDkdPcFkKsLAju8DW3%2Fuploads%2Fo9xXTDaqgjqqRT2qezMH%2Fepaisseur_mur_porteur.mp4?alt=media&token=8c728722-87f9-4457-9469-9a9cd4aa26a3>" %}

To change the thickness of a load-bearing wall:

1. **Click a load-bearing wall** to select it
2. Enter the desired thickness in the text field **"Thickness (cm)"**
3. Close the menu by clicking the arrow in the top-left corner

#### Change the wall type

{% embed url="<https://files.gitbook.com/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FZFcDkdPcFkKsLAju8DW3%2Fuploads%2Fce2HtIqmn9tlyiMsrCHX%2Fmodif_type_mur.mp4?alt=media&token=5a30a243-d0d5-40ce-8d4a-d15810ffb53e>" %}

Change the wall type after drawing the plan or scan:

1. **Click a wall** to select it
2. Under **"Wall types"**, click the**down arrow icon** to open the dropdown menu, then select the desired wall type
3. In "**Templates**" click "**Replace** **with**" to find the desired material
4. Close the menu by clicking the arrow in the top-left corner

***

### Change the wall anchor

{% embed url="<https://files.gitbook.com/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FZFcDkdPcFkKsLAju8DW3%2Fuploads%2FJ8SfuUCKtRBGHlzqmcdy%2Fancrage_murs.mp4?alt=media&token=e09ce84b-7685-428d-888b-5a370170873f>" %}
Change the wall anchor
{% endembed %}

1. **Click a wall** to select it
2. Choose one of the following three wall anchor options:
   1. **Inside** : the wall gets thicker toward the outside of the room.
   2. **Outside** : the wall gets thicker toward the inside of the room.
   3. **Centered** : the thickness is distributed on both sides.

{% hint style="info" %}
By default, partition walls in a scan are anchored on the inside. You can therefore change their thickness without changing the room area.
{% endhint %}

***

### Beams, posts and pillars

#### Add and delete a beam / post / pillar

{% embed url="<https://files.gitbook.com/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FZFcDkdPcFkKsLAju8DW3%2Fuploads%2FY8O36iCuuHwwxGlxyTZa%2Fpoutre_pilier_poteau.mp4?alt=media&token=ce99e336-edf1-49f1-a1d9-4ecdc48ecba3>" %}

To add a beam / post / pillar:

1. Click **Structure**
2. Select a beam, post or pillar
3. **Place the element** on your plan by clicking where you want it to be positioned
4. **Resize it by dragging the small circles** on either side of the element (if you place a resizable element)

To delete a beam / post / pillar:&#x20;

1. Select the object **in 2D view**
2. Press the **Delete key on your keyboard** or click the**trash icon** in the top-right corner of the object selection menu.

{% hint style="info" %}
Beams, posts, and pillars are managed like objects on the plan. To learn more about objects [**click here**](https://help.visuary.com/guide-visuary-en/le-plan/les-objets.md)
{% endhint %}

***

## Partition walls

The “Partition walls” section lets you add non-load-bearing interior walls that divide a space into rooms, whether fixed or easy to remove.

#### Change the thickness of a partition wall or removable partition

{% embed url="<https://files.gitbook.com/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FZFcDkdPcFkKsLAju8DW3%2Fuploads%2F0Cvm7oNstaK5GgYr1mMe%2Fmodif_epaisseur_cloison.mp4?alt=media&token=8584e7fc-39b3-4edf-b5f6-d1cb513bc360>" %}

To change the thickness of a partition wall or removable partition:

1. **Click a partition wall** to select it
2. In the **“Models”**, click **“Replace with”**
3. Select the partition wall model with the desired thickness
4. Click **“Finish”**

{% hint style="info" %}
Info: partition walls are managed like load-bearing walls. See the section above (adjusting dimensions, etc.).
{% endhint %}

***

## Floor dividers

The “Floor dividers” section lets you visually separate two zones in the same space without building a wall, for example, to distinguish an open-plan kitchen from a living room.

### Separate a space without adding partition walls

{% embed url="<https://files.gitbook.com/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FZFcDkdPcFkKsLAju8DW3%2Fuploads%2FpDqlW3BTRmD3a2EG6P8F%2Fdelimitation_sol.mp4?alt=media&token=3bbd4d4e-1d29-4f8f-9a0c-59e2c9f867d4>" %}
Floor dividers
{% endembed %}

To separate a space without adding partition walls:&#x20;

1. Click the **“Structure”**
2. Select the “**Divider**” tool in the **“Floor dividers”**
3. **Place each end against a wall or another divider to enclose the space.**

{% hint style="success" icon="lightbulb" %}
A divider lets you apply a different floor covering from the rest of the room, among other things. \
To learn more about floor coverings, [**click here**](https://help.visuary.com/guide-visuary-en/la-visualisation/les-revetements.md)**.**
{% endhint %}

***

## Exterior boundaries

The “Exterior boundaries” section includes elements for defining and enclosing outdoor spaces such as a garden, patio, or balcony.

### Create an outdoor space&#x20;

{% embed url="<https://files.gitbook.com/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FZFcDkdPcFkKsLAju8DW3%2Fuploads%2FJN842NlTG9UnpgJ02cCf%2Fdelimitations_exterieures.mp4?alt=media&token=8b0cb31e-9603-414c-8ca2-a5b6cf7cc88a>" %}

To create an outdoor space such as a balcony, patio, or garden:&#x20;

1. Click the **“Structure”**
2. Select the **“Railings and fences”** tool in the **“Exterior boundaries”**
3. Choose the railing or fence you want
4. Click the plan area to start drawing. Change direction at each corner to create your boundaries. Repeat until all your railings or fences are connected so the space can be recognized.&#x20;

***

### Check the connections between walls

When a room isn’t recognized, it’s usually because the wall junction is incorrect.

<details>

<summary><strong>Expand this menu to learn how to fix wall connections</strong></summary>

#### The room area seems incorrect or does not appear:

{% embed url="<https://files.gitbook.com/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FZFcDkdPcFkKsLAju8DW3%2Fuploads%2FO4mdmopsnVWWPHK1HtK0%2F2pieces_en1.mp4?alt=media&token=5f9772f8-da05-4893-a3ae-d1700c739f05>" %}
The room area seems incorrect
{% endembed %}

If a room's area seems incorrect even though the room is correctly detected:

1. **Hover over the Zone with your mouse** to highlight it in grey and view the full Zone.
2. **Zoom in as much as possible** on the plan to adjust the position of the walls and **correct their Wall junctions**. The Zone will then be automatically split into two separate spaces.

{% hint style="info" %}
The adjacent wall turns blue when the two walls are correctly connected at the Wall junction.
{% endhint %}

</details>

***

## Insulation

The “Insulation” section includes different types of insulation, applied internally (ITI) or externally (ITE).

### Add insulation

{% embed url="<https://files.gitbook.com/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FZFcDkdPcFkKsLAju8DW3%2Fuploads%2FyWYgFssyGVdorpfIXK91%2Fajt_isolant.mp4?alt=media&token=a64ad9ec-e776-45da-abe2-164dde232ab0>" %}

To add insulation:

1. Click the **Building**
2. Click **“Insulation”**
3. Click the wall faces where you want to apply insulation.
4. To **change the type of insulation**, click a wall to select it, then in the “Left insulation” and “Right insulation” sections, click the **“Add insulation” button:** select the insulation model you want.
5. Click **“Finish”**

{% hint style="info" icon="lightbulb" %}
With the **Intégral** and the **Product catalog**, you can add your own insulation materials.
{% endhint %}

### Change the insulation type

{% embed url="<https://files.gitbook.com/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FZFcDkdPcFkKsLAju8DW3%2Fuploads%2FbHyWK4cBfI4g4rqnaQeK%2Fmodif_isolant.mp4?alt=media&token=65d4b263-55ef-45f2-b5b0-c25dcdf68313>" %}

To change the insulation type:&#x20;

1. **In 2D view, click the insulation to select it**
2. **Select a new insulation type**
3. Click on the plan area to close the menu

### Remove the insulation

{% embed url="<https://files.gitbook.com/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FZFcDkdPcFkKsLAju8DW3%2Fuploads%2F8Z6dyZ4UObvQFJsWDqtM%2Fretirer_isolant.mp4?alt=media&token=6d3e423e-d7c7-437f-bf58-25595f78ea09>" %}

To remove the insulation:

1. **In 2D view, click the insulation to select it**
2. Select the product **"No insulation"** or click the **"trash"** icon at the top right of the menu.
3. Click on the plan area to close the menu

***

## Structural elements

The “Structural elements” section contains elements that organize circulation and openings in the building, such as stairs, floor openings, doorless passageways, and wall niches.

{% hint style="info" %}
Structural elements are managed like objects on the plan. To learn more about objects, [**click here**](https://help.visuary.com/guide-visuary-en/le-plan/les-objets.md)
{% endhint %}

### Add a staircase&#x20;

#### Create a straight staircase

{% embed url="<https://files.gitbook.com/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FZFcDkdPcFkKsLAju8DW3%2Fuploads%2FDYGq8cunsXqO8NkX3hLN%2Fupdate_escalier_droit.mp4?alt=media&token=a081e5b8-c3da-4e59-bc7f-5c0f8f38cfe3>" %}

To add a straight staircase:&#x20;

1. In the **“Building”**, type “Staircase” in the search bar
2. Place the element on the plan and duplicate it so there are at least three.
3. Switch to 3D view to adjust the placement height of each staircase and create a smooth connection between them.

To add a quarter-turn staircase:&#x20;

1. In the **“Building”**, type “Staircase” in the search bar
2. Add to the plan **two straight staircases** and **one winder staircase**.
3. Switch to 3D view to adjust the placement height of each staircase and create a smooth connection between them.

### Add a floor opening

{% embed url="<https://files.gitbook.com/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FZFcDkdPcFkKsLAju8DW3%2Fuploads%2F0GezvJeDGDemfDo3995F%2Ftremie.mp4?alt=media&token=8a23f13e-8086-4748-b676-8b5cfc640cb5>" %}

To add a floor opening:&#x20;

1. In the **“Building”**, type “Floor opening” in the search bar
2. Select a floor or ceiling opening, as needed
3. Place the element on the plan

{% hint style="success" icon="lightbulb" %}
**The floor opening automatically affects the quantity takeoff:**

For a floor opening: the floor area shown in the quantity takeoff automatically excludes the area occupied by the opening.

For a ceiling opening: the ceiling area shown in the quantity takeoff automatically excludes the area occupied by the opening.
{% endhint %}

***

<table data-view="cards"><thead><tr><th></th><th data-hidden data-card-target data-type="content-ref"></th></tr></thead><tbody><tr><td>Floor and wall coverings</td><td><a href="https://help.visuary.com/guide-visuary-en/la-visualisation/les-revetements.md">Coverings</a></td></tr><tr><td>Rooms</td><td><a href="https://help.visuary.com/guide-visuary-en/le-plan/les-pieces.md">Rooms</a></td></tr><tr><td>Quantity takeoff</td><td><a href="https://help.visuary.com/guide-visuary-en/les-donnees/le-metre.md">Quantity takeoff</a></td></tr></tbody></table>


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://help.visuary.com/guide-visuary-en/le-plan/bati.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
