> For the complete documentation index, see [llms.txt](https://help.visuary.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://help.visuary.com/guide-visuary-en/la-visualisation/les-revetements.md).

# Coverings

<figure><img src="https://4038224095-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FZFcDkdPcFkKsLAju8DW3%2Fuploads%2Fp0Gsjf78NMktm5vOsgys%2Frevetements.gif?alt=media&amp;token=1efee4c1-6f90-45a1-913a-045ec7f55da0" alt=""><figcaption></figcaption></figure>

Apply a finish to the plan:&#x20;

1. Click the **Finishes**
2. **Select a finish** from the available categories (Floor, Walls, Ceiling, Skirting boards)
3. Switch to **3D view**
4. **Click the areas where you want to apply the finish**
5. Click **Done**

{% hint style="warning" %}
**Room names are directly linked to the finishes you can add.** The available finishes vary depending on the room type.\
For example: **if one of your rooms is named Shaft, you won't be able to apply any finish to it** because red lines will appear when you hover over the room.
{% endhint %}

***

### Apply a finish to multiple surfaces at once

To save time, you can apply a finish to multiple surfaces at once:

{% columns %}
{% column %}

<figure><img src="https://4038224095-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FZFcDkdPcFkKsLAju8DW3%2Fuploads%2FKyJyQ6nSJQnikHBrOwFu%2FCapture%20d%E2%80%99e%CC%81cran%202026-03-20%20a%CC%80%2016.33.32.png?alt=media&amp;token=eda5578b-2960-4a6d-93da-03d8cf7c9e75" alt=""><figcaption></figcaption></figure>

**For Floors, Ceilings, and Skirting boards** you can choose whether to apply the finish to a **specific room** or to the **entire plan**.
{% endcolumn %}

{% column %}

<figure><img src="https://4038224095-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FZFcDkdPcFkKsLAju8DW3%2Fuploads%2FGk6NLkrMNU87f4EMzUqX%2FCapture%20d%E2%80%99e%CC%81cran%202026-03-20%20a%CC%80%2016.37.41.png?alt=media&amp;token=e94e2c23-e195-4bd9-b8ec-a12e3041413c" alt=""><figcaption></figcaption></figure>

For **Walls**, you can choose whether to apply the finish to a **section of wall**, a **specific room** or the **entire plan**.
{% endcolumn %}
{% endcolumns %}

{% hint style="info" %}
Adding Finish / Covering to skirting boards works differently; you can choose to apply the floor Finish / Covering, wall Finish / Covering, or the default Finish / Covering:&#x20;

<img src="https://4038224095-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FZFcDkdPcFkKsLAju8DW3%2Fuploads%2FrBnLwLskgvOoSLEQI07f%2FCapture%20d%E2%80%99e%CC%81cran%202026-03-20%20a%CC%80%2016.51.58.png?alt=media&amp;token=04aa1b6c-7368-42e9-affa-4d91acfb51a4" alt="" data-size="original">
{% endhint %}

***

### Apply a finish to part of a wall

{% embed url="<https://files.gitbook.com/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FZFcDkdPcFkKsLAju8DW3%2Fuploads%2FEQitYPZ7KkpbbhaJJVlW%2Frev_partie_mur.mp4?alt=media&token=9ce8294d-b814-4ac4-aa95-0ba414abb1fd>" %}

Apply a wall finish to part of a wall vertically:&#x20;

1. Click **Structure** and select **Divider**
2. Add a **short divider segment** where you want to split the wall, extending it slightly into the room
3. Click the **Finishes**
4. Select a wall finish and switch to **3D** to apply it to the split section of wall
5. Click **Done**

<p align="center"></p>

### Change a finish's height

{% embed url="<https://files.gitbook.com/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FZFcDkdPcFkKsLAju8DW3%2Fuploads%2FsVhFVFS5VwSJcE8HrHfF%2Fhauteur_rev.mp4?alt=media&token=0cc6a97c-f939-452d-91cd-d4a075f1a60a>" %}

Add a finish to part of a wall horizontally:&#x20;

1. Click the **Finishes**
2. Select a wall finish
3. Click **See more** in the finish selection box:\
   \- enter **its placement height** (in cm)\
   \- enter **its height** (in cm)
4. **Switch to 3D view** and **click the walls** to apply the finish
5. Click **Done**

{% hint style="info" %}

* **The height** is the size of the finish itself—that is, how far it extends up the wall. In practical terms, it is the vertical dimension of the finish.
* **The Placement height** is the distance between the floor and the start of the finish.

\
This technique lets you create a wall tile border, for example. To learn more about finishes in the bathroom, click [**here**](#les-revetements-dans-la-salle-de-bain)**.**
{% endhint %}

***

### Changing the orientation of a finish

For floor and wall finishes, **you can change their orientation, which affects the positioning angle** of the finish and therefore changes its overall appearance.<br>

#### Wall finish orientation&#x20;

There are 3 different orientations for wall finishes: 0°, 90°, or 180°. You can select the desired orientation before applying the finish to your walls.

{% embed url="<https://files.gitbook.com/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FZFcDkdPcFkKsLAju8DW3%2Fuploads%2FsVhFVFS5VwSJcE8HrHfF%2Fhauteur_rev.mp4?alt=media&token=0cc6a97c-f939-452d-91cd-d4a075f1a60a>" %}

#### Floor finish orientation

For floor finishes, you can choose any orientation from 0° to 360°.&#x20;

To do this, simply use the slider to select the desired orientation before applying the finish to your plan:&#x20;

{% embed url="<https://files.gitbook.com/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FZFcDkdPcFkKsLAju8DW3%2Fuploads%2FEsgTelGDJASNTofvZx8M%2Forientation_rev_sol.mp4?alt=media&token=7f51741e-e368-49dc-9a3b-c523886a4913>" %}

***

### Finishes in the bathroom

#### Change the Sanitary tile in the Wet room

{% embed url="<https://files.gitbook.com/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FZFcDkdPcFkKsLAju8DW3%2Fuploads%2F7yyrEqNd26LOcfMwYcT4%2Ffaience_piece.mp4?alt=media&token=15129755-dd1e-45cf-89a1-554c0a7677fb>" %}

To change this Wall tile, follow these steps:&#x20;

1. Position yourself **in 2D view**
2. Click on the bathroom floor to **select the room**
3. In the menu that opens on the left, click "**Replace with**" in the section **Wall tile** : you can then choose another Finish / Covering.

{% hint style="info" %}
**The room's wall tile is automatically applied to certain objects**. You can change this by selecting the object in question and opening its customization menu. \
Click [**here**](https://help.visuary.com/guide-visuary-en/le-plan/les-objets.md#personnaliser-un-objet) to learn more
{% endhint %}

#### Applying 2 wall tile designs to the same wall

{% embed url="<https://files.gitbook.com/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FZFcDkdPcFkKsLAju8DW3%2Fuploads%2F4KiQtbUabDf5Y5yvLgQY%2FCopy%20of%202faiences_rev.mp4?alt=media&token=34aab525-0507-4323-8fcd-09c68bef304b>" %}

**Step 1:**&#x20;

* Switch to 2D view, then select your room to open the menu on the left.
* Select the wall tile design you want and switch to 3D view to see the changes more clearly.
* Check the box **Wall tile on all walls**, so it applies to the entire room.
* To create a wall tile border, you also need to enter the height and placement height of the border.

**Step 2:**&#x20;

* Click the **Finishes**menu on the left of your screen, then go to the Walls tab.
* Select the finish to apply to the other part of your room.
* Then click **See** **More**to enter the placement height of the border.
* Switch to 3D view, then click all the walls where you want to apply the finish.&#x20;
* Click **Done**

***

### Applying a finish to an exterior facade

{% embed url="<https://files.gitbook.com/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FZFcDkdPcFkKsLAju8DW3%2Fuploads%2FF1BYsNH92i0lehBnIGSV%2Frev_exterieur.mp4?alt=media&token=1fed0a4b-2b1a-4440-bc38-be1ab849a051>" %}

To apply a finish to an exterior facade:&#x20;

1. In 2D or 3D view, click an exterior facade to select it.
2. In the menu that opens on the left, click the "Default materials" button.
3. Use the search bar to find the finish you want.

***

### Viewing finishes

In 2D view, color codes help you distinguish the different finishes shown on the plan:&#x20;

{% embed url="<https://files.gitbook.com/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FZFcDkdPcFkKsLAju8DW3%2Fuploads%2FCxjr4NITHW9cmH7VyV81%2Fcode_couleurs_2D.mp4?alt=media&token=d972c389-43aa-4b9d-b15d-bcfe5936c398>" %}

<table data-view="cards"><thead><tr><th></th><th data-hidden data-card-target data-type="content-ref"></th></tr></thead><tbody><tr><td>The Intégral subscription</td><td><a href="https://help.visuary.com/guide-visuary-en/parametres-et-abonnements/abonnements-et-facturation.md#labonnement-integral">Subscriptions and billing</a></td></tr><tr><td>Renders</td><td><a href="https://help.visuary.com/guide-visuary-en/la-visualisation/les-rendus.md">Renderings</a></td></tr><tr><td>The PDF report </td><td><a href="https://help.visuary.com/guide-visuary-en/le-partage-et-export/le-dossier-pdf.md">PDF report</a></td></tr></tbody></table>


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://help.visuary.com/guide-visuary-en/la-visualisation/les-revetements.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
