> For the complete documentation index, see [llms.txt](https://help.visuary.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://help.visuary.com/guide-visuary-en/according-to-your-profession/create-a-renovation-proposal-for-a-bathroom.md).
# Create a Renovation proposal for a bathroom
*Renovating a classic bathroom or a PMR bathroom; from choosing the right equipment, finishes and layouts to ensuring compliance with current standards.*
### Classic bathroom renovation
#### Change the shower type
{% embed url="" %}
To change the shower type:
1. **In 2D view, select the bathtub or the original shower tray**
2. Click on **"Replace with"** in the selection menu on the left
3. Select the shower type you want to install
4. Click on **"Confirm"** to confirm the change
5. If needed, adjust its Dimensions using the handles at the ends of the Object / Element
#### Add a shower panel
{% embed url="" %}
To add a shower panel to the tray:
1. **Select the shower tray**
2. Click on **"Customize this model"** in the selection menu on the left
3. Switch to 3D view, and select the panel of your choice
4. Select the "door positioning" (right, left, back): this is the side from which the panel will be visible
5. Click on **"Finish"** to confirm the change
#### Customize a vanity unit
{% embed url="" %}
To change the vanity unit color:
1. **In 2D view, select the vanity unit**
2. Click on **"Customize this model"** in the selection menu on the left
3. Switch to 3D view, and select a Facade color
4. Click on **"Finish"** to confirm the change
{% hint style="info" %}
The customization feature is not available on all models; if the button is not present in the object's selection menu, it means it can't be customized.
{% endhint %}
#### Freely adjust an Object / Element's position
{% embed url="" %}
To freely adjust an Object / Element's position:
1. **Select the Object / Element** in 2D view
2. In the selection menu that opens on the left, **uncheck the "Align to wall" option**
***
### Set up an accessible shower area for people with reduced mobility
{% hint style="warning" %}
In this section, we detail each step by relying on objects that offer greater flexibility in terms of positioning.\
Some of these objects are available exclusively in our **full Product catalog**, **available with an Intégral subscription** (or depending on your Enterprise subscription).\
\
If you have the Intégral subscription, you will need to add these objects manually to your Workspace. To learn more, [**click here**](/guide-visuary-en/visuary-interface/product-catalog.md).
{% endhint %}
#### Change the shower type
{% embed url="" %}
To change the shower type:
1. **In 2D view, select the bathtub or the original shower tray**
2. Click on **"Replace with"** in the selection menu on the left
3. Select the shower type you want to install
4. Click on **"Confirm"** to confirm the change
5. If needed, adjust its Dimensions using the handles at the ends of the Object / Element
{% hint style="success" icon="lightbulb" %}
You can change the model of all the other equipment (sink, WC, etc.) in the same way.
{% endhint %}
#### Add a curtain or a shower panel
{% embed url="" %}
To add a curtain or an individual shower panel:
1. Click on **"Objects"**
2. In the search bar, type **"Shower panels"**
3. Select the item of your choice and place it on the plan
#### Add a shower column
{% embed url="" %}
To add a shower column:
1. Click on **"Objects"** on the left of the screen
2. In the search bar, type **"Plumbing fixtures / Taps"**
3. Select the desired item and position it on the plan
***
### Add accessible equipment and make sure standards are met
#### Add accessible equipment and accessories
{% embed url="" %}
To add assistive devices:
1. Click on **"Objects"** on the left of the screen
2. In the search bar, type **"Assistive device"**
3. Select the desired item and position it on the plan
4. If needed, click on **"Replace with"** in the left menu to change the assistive device model
#### Check the accessibility of the space
{% embed url="" %}
To check smooth circulation and the absence of obstacles:
1. Click on **"Objects"**
2. Click on **"Measurement tools and PMR standards"**
3. Select the tool of your choice (e.g. the PMR Circle)
4. Place the tool on the plan to accurately visualize the available space between each item
***
### Manage finishes in wet rooms
#### Change the sanitary tile
{% embed url="" %}
To change this tile, follow these steps:
1. Switch to **2D view**
2. Click on the bathroom floor to **select the room**
3. In the menu that opens on the left, click on "**Replace with**" in the **Wall tile** : you can then choose another Finish / Covering.
{% hint style="info" %}
The "room Wall tile" is automatically applied to the bathtub apron, at the level of the Sanitary tile, and to all objects customized with the "room Wall tile" option.
{% endhint %}
#### Apply 2 Wall tile strips on the same wall
{% embed url="" %}
To place two Wall tile strips vertically on a wall:
**Step 1:**
1. Start by switching to 2D view, then select your room to bring up the menu on the left.
2. Select the wall tile model that suits you and switch to 3D view to better visualize the changes.
3. Check the box **Wall tile on all walls**, so it applies to the entire room.
4. Set a height or a Placement height
**Step 2:**
1. Click the **Finishes**, on the left of your screen, then go to the **Walls**
2. Select the wall tile that will be applied to the upper part of your room
3. Switch to 3D view mode, then click all the walls in the room to apply the wall tile.
4. Click on **Finish**
#### Create a wall tile frieze
{% embed url="" %}
To create a wall tile frieze:
**Step 1:**
1. Start by switching to 2D view, then select your room to bring up the menu on the left.
2. Select the wall tile model that suits you and switch to 3D view to better visualize the changes.
3. Check the box **Wall tile on all walls**, so it applies to the entire room.
4. **Set a height and a Placement height**
**Step 2:**
1. Click the **Finishes**, on the left of your screen, then go to the **Walls**
2. Select the wall tile that will be applied to the upper part of your room
3. Switch to 3D view mode, then click all the walls in the room to apply the wall tile.
4. Click on **Finish**
#### Apply a Finish / Covering to part of the wall
{% embed url="" %}
To apply a Finish / Covering to part of the wall:
1. Click on **Walls** and select the **Divider**
2. Add a **small divider segment** where you want to cut the wall, stretching it slightly toward the inside of the room
3. Click the button **Finishes**
4. Select a wall finish and switch **to 3D** to apply it to the split section of the wall
5. Click on **Finish**
***
### Create elevation views
{% hint style="warning" %}
Elevations are **available only with an Intégral or Enterprise subscription**. \
To learn more about elevations, [**click here**](#realiser-des-vues-en-elevation).
{% endhint %}
{% embed url="" %}
To create an elevation:
1. Click the button **Elevations**
2. Click on "**Create an elevation view**"
3. **Select the wall section** from which you want to create the elevation
4. **Adjust the clipping distance** at the bottom of the screen
5. Click on **Save**
***
### Create renders
{% hint style="warning" %}
Renders are **available only with an Intégral or Enterprise subscription**. \
To learn more about renders, [**click here**](/guide-visuary-en/visualization/renderings.md).
{% endhint %}
{% embed url="" %}
To create a render:
1. Click on the button "**Renders**"
2. Click on "**Make a render**"
3. By clicking the "**Image**" button, you can choose between **creating a fixed render or a panorama**.
4. Position the camera in the room and adjust the desired viewing angle with your mouse
5. Click on "**Launch a render**"
***
### Export the PDF report for your project
{% hint style="info" %}
Available from the Essentiel subscription. The Intégral subscription allows you to add extra pages (renders, elevations, surfaces page, etc.).
To learn more about the PDF report, [**click here**](/guide-visuary-en/sharing-and-export/pdf-report.md)**.**
{% endhint %}
{% embed url="" %}
---
# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.
## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.
Perform an HTTP GET request on the current page URL with the `ask` query parameter, and the optional `goal` query parameter:
```
GET https://help.visuary.com/guide-visuary-en/according-to-your-profession/create-a-renovation-proposal-for-a-bathroom.md?ask=&goal=
```
`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is optional and describes the broader end goal you are ultimately trying to accomplish on behalf of the user. GitBook uses it to tailor the answer towards what is most useful for that goal.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.
Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.